| Frame | 6061 alloy, hydroformed T6 aluminium, multi-butted, tapered head tube,internal cable routing and custom Whyte dropouts, chain stay kickstand mount |
| Fork | Whyte straight bladed 6061 alloy, alloy tapered steerer, internal cablerouting, 12mm thru-axle, Post Mount with single eyelets for mudguards |
| Headset | NO.69 / SRS 1-1/8in/1.5in - front entry for cables |
| Rear Hub | Alloy, cup and cone, double seal, 32 hole |
| Front Hub | Alloy, double sealed cartridge bearings, 12mm x 100mm thru-axle, 32 hole |
| Spokes | 2.0mm, PG, Black Stainless, Brass Nipples |
| Rims | WTB STp I27, 32 Hole |
| Tyres | Maxxis Reaver Tanwall 700 x 45c, EXO wire bead |
| Shift Levers | Shimano Deore 10 speed Rapidfire |
| Front Derailleur | N/A |
| Rear Derailleur | Shimano Deore 10 speed, Shadow design and direct attachment |
| Cassette | Shimano Deore 10 speed, 11-46T |
| Chain | Shimano Deore 10 speed |
| Crankset | Whyte alloy, 40T alloy chainring |
| Bottom Bracket | Shimano BSA, square taper, 122.5mm |
| Seatpost | Whyte 6061 alloy, 20mm offset, 350mm, two bolt clamp |
| Seat | Whyte Custom |
| Bar | Whyte one piece bar and stem, 50mm extension, 720mm width, 20mmrise, seven degree back, four degree up |
| Stem | See Above |
| Grips | Whyte Custom dual density lock-on |
| Front Brake | Tektro T3020 Clean Sweep Design, three finger comfort lever, 180mmrotor - 1.8mm thickness |
| Rear Brake | Tektro T3020 Clean Sweep Design, three finger comfort lever, 180mmrotor - 1.8mm thickness |
| Brake Levers | Tektro T3020 Clean Sweep Design |
| Pedals | Fibre Reinforced Composite Platform - Click here to choose an upgrade pedal |